Product total
Options total
Grand total


Contact us at sales@utvcustomfanshop.com to learn more about pricing for these upgrades. Upgrade your Polaris today and enjoy a comfortable and dust-free ride!


The Polaris Overhead fans help with the heat and helps to remove dust. The Polaris Xp and Xp Pro have 10″ fans All the other  models come with 12″ fans. These fans help to push the heat and dust down. Or you can hit the reverse switch and pull the air up (Helpful in the Winter). Depending on your preference, you  can have a gentle breeze or Hurricane force winds. Made with Aluminum square tubing for support and Rivet nuts hold it all together.


Fits Polaris Models
No Modification to ROP
Fits Factory ROP with OEM Roof
Aluminum Square tubing
Dual Speed Controllers with Reverse
Rivet Nuts (No Pop Rivets)
Plug and Play
60 Different Variations
All Wiring is Soldered
Everything Is Included For Installation
15 Amp Inline Fuse
Quick Disconnect


Ouvrir la photoWe’ve got you covered with everything you need to install your new overhead unit! Inside the box, you’ll find a power lead with a quick disconnect and buss bar ends, 4 clamps, 4 panhead screws that go into the clamps, and a couple of zip ties to tidy up your work. Installation is a breeze and can be done by yourself or with the help of a friend.

To start with the installation, install the 4 clamps on the roll cage. You have two options for location mounting. The first option is to place the first clamp toward the rear and in front of the Weld for the Bung. Then measure 16 inches forward and place the front clamp. The second option is to place the first clamp toward the front against the Gusset Plate. Then measure 16 inches toward the rear and install the clamp. Once the clamps are in place, lift the unit above the clamps and run the panhead screw through the clamp into the tubing. This is where the helping hands come in handy. Once you have it secure, remove the fuse from the power supply cord and fish the wires to your bus bar. Connect the red wire to the positive and the black wire to ground. Loop any remaining wire behind the dash. Install the fuse and tidy up your work, and you’re done! Now, it’s time to hit the road and enjoy your ride.

Additional information

Weight 10 lbs

All Models

Background Color


Fan Color


Front LEDs


Rear LEDs



There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.