Kawasaki KRX

Product total
Options total
Grand total


Contact us at sales@utvcustomfanshop.com to learn more about pricing for these upgrades. Upgrade your Kawasaki KRX  today and enjoy a comfortable and dust-free ride!


The Kawasaki KRX

The Kawasaki KRX  is the ultimate solution for a hot and dusty cab in your KRX 2 Seater vehicle. Our overhead fans effectively combat the heat and remove dust, pushing it down with a gentle breeze or hurricane force winds based on your preference. With a simple flip of the reverse switch, you can pull air up in the winter to keep you warm.

Our product is made with sturdy aluminum square tubing and rivet nuts, ensuring durability and longevity. Installation is a breeze with our plug-and-play design, which requires no modification to ROP and fits the factory ROP with OEM roof.

The KRX 1000 comes in 60 different variations, including four LED light colors, three fan colors, and four colored background options to suit your style. All wiring is soldered, and the product comes with everything required for installation, including a 15-amp inline fuse and quick disconnect.

Additionally, we offer four upgrade options, including:

  • Front LED’S
  • Rear LED’S
  • Individual fan controls
  • Dual usb port



Included are all the necessary parts to install your new overhead unit. Inside the box you will find the power lead with quick disconnect and buss bar ends. There will be 4 clamps, 4 button head that go into the clamps and mount to the ends of the unit. Couple Zip ties to clean up your work. Installation is a breeze, You can do it yourself or get a pair of helping hands.

Ouvrir la photo


First install the 4 clamps on the roll cage. To do this move to the inside of the machine. Take a clamp and with the flat side facing up, push it between the bottom of the roof and top of the roll bar and rotate it until the flat part of the clamp is now on the bottom. Measure roughly 16″ and place the next clamp and repeat for the other side. (Sometimes it’s easier to start in the front as that is the smallest the roll cage are apart). Once the clamps are in place lift one side of the unit and set it above the clamps, run the button head through the clamp into the Tubing and do the same for the other side. Take your Allen key and just snug them up, no need for massive force to hold them in place. If you over tighten them, you will spin out the Rivet Nut. Remove the Fuse from the power Supply cord and fish the wires to your bus bar behind the center console. Connect red to positive and black to ground. Loop any remaining wire behind the dash. Install Fuse and clean up your mess, your done. Now Go Riding.

Additional information

Weight 13 lbs

All Models

Background Color


Fan Color


Front LEDs


Rear LEDs



There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.