John Deere Gator

Product total
Options total
Grand total

$415.00

Contact us at sales@utvcustomfanshop.com to learn more about pricing for these upgrades. Upgrade your John Deere Gator today and enjoy a comfortable and dust-free ride!

Description

The John Deere Gator overhead fans help with the heat and helps to remove dust. These 12″ fans push the heat and dust down. Or you can hit the reverse switch and pull the air up (Helpful in the Winter). Depending on your preference, you  can have a gentle breeze or Hurricane force winds. Made with Aluminum square tubing for support and Rivet nuts hold it all together.

FEATURES

Fits John Deere Gator Models
No Modification to ROP
Fits Factory ROP with OEM Roof
Aluminum Square tubing
Dual Speed Controllers with Reverse
Rivet Nuts (No Pop Rivets)
Plug and Play
60 Different Variations
All Wiring is Soldered
Everything Is Included For Installation
15 Amp Inline Fuse
Quick Disconnect

Included are all the necessary parts to install your new overhead unit. Inside the box you will find the power lead with quick disconnect and buss bar ends. There will be 4 clamps, 4 button head that go into the clamps and mount to the ends of the unit. Couple Zip ties to clean up your work. Installation is a breeze, You can do it yourself or get a pair of helping hands.

Ouvrir la photo

Installation:

First install the 4 clamps on the roll cage. To do this move to the inside of the machine. Take a clamp and with the flat side facing up, push it between the bottom of the roof and top of the roll bar and rotate it until the flat part of the clamp is now on the bottom. Measure roughly 16″ and place the next clamp and repeat for the other side. (Sometimes it’s easier to start in the front as that is the smallest the roll cage are apart). Once the clamps are in place lift one side of the unit and set it above the clamps, run the button head through the clamp into the Tubing and do the same for the other side. Take your Allen key and just snug them up, no need for massive force to hold them in place. If you over tighten them, you will spin out the Rivet Nut. Remove the Fuse from the power Supply cord and fish the wires to your bus bar behind the center console. Connect red to positive and black to ground. Loop any remaining wire behind the dash. Install Fuse and clean up your mess, your done. Now Go Riding.

Additional information

Weight 13 lbs
Model

Models

Background Color

Customizable

Fan Color

Customizable

Front LEDs

Customizable

Rear LEDs

Customizable

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.